Sensor Night Lamp Instruction
Summary
The DSW-LD-P500 is a new type of energy saving motion sensor lamp: it achieves the sensor function by
adopting the PIR technology; due to the long life, the LED has been as the light source. The DSW-LDP500
can assist to achieve the lighting when people are in the condition of sleep in night. When it is night
(or the illumination is below definite value), slide the switch to "AUTO", in that time, the DSW-LD-P500
will detect the PIR digital from human body and to achieve the lighting. When slide the switch to "ON", the
DSW-LD-P500 can light at all times, due to the function, we can use it as the universal night lamp and
assist to light. Considering of all features, the DSW-LD-P500 can be seen in various field where the PIR
digital from human body can be detected more easily, such as night table,desk,aisle,toilet and so on.
In the condition of induction , the DSW-LD-P500 will achieve the lighting by detecting the illumination
automatically,so we can see the following scene:it is off in daylight(or luminous environment), in like
manner,it is on in night(dark or the illumination>10lux),in the condition of induction,the DSW-LD-P500
will receive the digital and start to work, at the same time, it will be off if detect no any digital within
subsequent 10 seconds, likewise, the induction delay-time will be overlaid continuously and the night
lamp will be on once detect the subsequent digital. We can slide the switch to "ON " if we need it to light at
all times,when slide the switch to "OFF", the DSW-LD-P500 will stop working .
Specifications
Power supply: 4X1.5V batteries Time setting: 10±2sec
Working current: 90mA Detection range :6-8m(24ºC)
Static current: 30~40μA Light-control: <10LUX
Rated load: 0.36W Max. Detection angle: 140°/120°
Single power: 0.06W Working humidity: <93%RH
LED quantity: 6 PCS Working temperature: -10~+40°C
Problems and solutions
1. The lamp doesn't work:
a)please check if the power connection is ok;
b)pleas check if the ambient working light accords with instruction.
2. The induction sensitivity is low:
a)please check if in front of the detection window there is obstruction effecting the sensor to receive signal;
b)please check the temperature is too high;
c)please check if the sense signal is in the detection range;
3. The sensor can not shut off the lamp automatically:
a)check if in the detection range there is continual sense signal;
b)check if the power accords with instruction required;
c)check if theair temperature near the sensor lamp change obviously, for example air conditioning or air heating, etc.
Q1: If you are factory or trade company?
we are manufacturer with more than 10 years.
Q2: What is your delivery time?
we promise 30-35 days once deposit paid
Q3: What is your payment terms?
we accept TT and L/C at sight.
Q4: Can you provide OEM design?
yes, we can, we are factory under ourself R&D team
Q5: What is your MOQ?
Our MOQ is 500 pcs.
Q6: Our main shipping port :Ningbo,shanghai port
){kind=link}