- Model NO.: WXXD6 AUTOMATIC FIRE SUPPRESSION SYSTEM
- Transport Package: Wood Box
- Origin: China
- Trademark: DSW
- Specification: SET
DSW fire tracer automatic can provide Cost-Effective, Stand-Alone, Automatic Fire Suppression Systems for your Critical Equipment, Electrical/Technical Systems and various types of enclosures. The effectiveness of a genuine Firetrace suppression System, happens by utilizing the proprietary Firetrace Detection Tubing (a Linear Pneumatic Heat Sensor), which detects a fire due to precise temperature sensitivity, allowing our systems to react quickly and effectively.
This unique detection can be run through the smallest or most complex enclosures to ensure detection is always close at hand. A Firetrace System can be utilized anywhere that a fire poses a risk, and it is flexible enough for virtually any Industrial Equipment, Traditional as well as Emergency Vehicles, Storage Compartments, Control Cabinets or various types of Remote Installations.
From CNC Machines and Fume Hoods, to Bus Fire Suppression, a Firetrace System is the leader in reliable Automatic Fire Suppression for your critical equipment care.
Direct Release System<o:p>
The Firetrace Direct Release Fire Protection System utilizes the Firetrace Tube as both the "Detection Device" and "Suppressant Delivery System".
As the fire begins, the portion of the tube nearest the point where the most heat is detected ruptures, forming an effective spray nozzle.
The pressure will then drop as the Firetrace tube releases the entire contents of the cylinder through the distribution nozzle to effectively suppress the fire.
More than one Firetrace tube can be used enabling the system to cover more area.<o:p>
Indirect Release System<o:p>
The Firetrace Indirect Fire Protection System uses the Firetrace Tube as a "Fire Detection" and "System Activation" device, not as the discharge tube.
Once the tubing senses the fire, it then ruptures - resulting in a drop of pressure causing the Indirect Valve to activate. This diverts flow from the detection tube to the larger outlet ports.
The Extinguishing Agent is then discharged from the cylinder through the diffuser nozzles, flooding the area in a proprietary mix of fire extinguishing chemicals, effectively suppressing the fire quickly and thoroughly.
The Firetrace Indirect Fire Protection System uses the Firetrace Tubing as a "Fire Detection" and "System Activation" Device, not as the discharge tube.<o:p>
· Once the tubing senses the fire, the tube then ruptures and the resulting drop in pressure causes the Indirect Valve to activate. Carbon Dioxide (CO2 ) is then discharged from the cylinder through a fixed piping network and out of the diffuser nozzles, flooding the area in extinguishant and suppressing the fire quickly and thoroughly. Multiple diffuser nozzles may be added to meet the application requirements.<o:p>
· One of the advantages of using CO2 as the suppression agent is its lack of adverse environmental impact. CO2 has no impact on the ozone layer, and it does not contribute to the "Greenhouse" effect. As with other gaseous agents, it quickly and easily penetrates all areas within an enclosure.<o:p>· Always use caution when considering a CO2 system as the protected areas must NEVER be occupied by a person or persons. Even small amounts of CO2 can be harmful or fatal if inhaled.<o:p>